3D Elastic Filler For Water Treatment
The elastic three-dimensional filler is selected from polyolefins and polyamides with high-quality varieties of corrosion resistance, temperature resistance, and aging resistance. It is mixed with additives such as hydrophilicity, adsorption, and thermal oxygen resistance, and special wire drawing is used to make wool. Process, the thread is interspersed and fixed on the corrosion-resistant, high-strength central rope. Due to the excellent material selection and process formula, moderate rigidity and flexibility, the thread is arranged in a three-dimensional uniformly radiated state, and a suspension type three-dimensional elastic filler monomer is made , The filler can be spread uniformly in all directions in the effective area, so that air, water, and biofilm can be fully mixed and exchanged. The biofilm can not only be uniformly implanted on each thread, but also maintain good activity and The variability of the gap, the ability to obtain an increasingly larger specific surface area during operation, and the ability to carry out good metabolism. This feature and phenomenon is unmatched by other fillers in China.
Product Information:
Product Material:Polyolefin And Polyamide
Construction Process:Knotting And Binding
Product Structure:Combination Of Fiber West And Nylon Yarn
Product Grade:High Quality
Scope Of Application:Biochemical Treatment Of Industrial Organic Wastewater And Urban Sewage
Features:
Compared with hard honeycomb fillers, three-dimensional elastic fillers have greater pore variability and no blockage; compared with soft fillers, the material has a longer life and does not stick to the group; compared with semi-soft fillers, the specific surface area is larger and the film hangs Fast and low cost. Therefore, the filler can be confirmed to be the fourth-generation high-efficiency and energy-saving novel filler following various hard fillers, soft fillers and semi-soft fillers.
Main Technical parameter table (Reference):
| Model (mm) | Length (m/m3) | Weight (kg/m3) | Filmed weight (kg/m3) | Surface area (m2/m3) | Diameter wire(mm) |
| Æ150 | 44 | 1.4～2.0 | 64～69 | 200～310 | 0.35～0.45 |
| Æ160 | 39 | 1.3～1.9 | 61～66 | 280 | 0.35～0.45 |
| Æ180 | 30 | 1.2～1.8 | 57～62 | 265 | 0.35～0.45 |
| Æ200 | 25 | 1.1～1.7 | 55～60 | 250 | 0.35～0.45 |
Product Tags:
|
|
3D Elastic Filler For Water Treatment Images
|
